StarSoft EQC

StarSoft EQC is 85% active.

StarSoft EQC is non-flammable. The solvent package is a combination of DEG (CAS #11-46-6) and DPG (CAS #25265-71-8).

StarSoft EQC has a melting point of 21°C which allows for “Cold Prep” manufacturing.

StarSoft EQC is plant-derived. We are very proud that EQC is vegetable-based and, as it is made from cotton-feed (non-edible), it does not take away raw materials for food supplies.

Company Information

Company Name
StarChem, LLC
Manufacturing Address
10150 Greenville Hwy, Wellford, SC 29385
Product Information
INCI
Diakyl diester hydroxy ethyl methyl ammonium methosulfate, dipropylene glycol, and Diethylene glycol
Harmonized Tariff Code
3809.91.0000
Export Classification
EAR-99
CAS Number
91995-81-2 / 25265-71-8 / 111-46-6

Typical Properties

Appearance

Light yellowish paste below 21°C, light yellowish liquid above 21°C

Color (Gardner)

<5 max

Acid Value

9.0 max

Total Amine Value

4.5 max

Solids

~85%

Melt Point °C

~21

pH (5% IPA/aq)

~2.5 to 3.5

Moisture

1.0 max

Other Information

Shelf Life

12 months from the date of manufacture

Country of Origin

USA

Listed International Inventories

TSCA, DSL, ECHA

Biodegradability

StarSoft EQC is degradable by microorganisms in the aquatic environment based on the OECD pass level of biodegradability (60%).

Food Allergen Labeling (FALCPA)

This product does not contain any FALCPA listed food allergens as an ingredient or additive.

Animal Origin

This product does not contain any animal derived ingredients.

Genetically Modified Organisms

The fatty acid used for this product is derived from plants that are not genetically modified. The sorbitol used in this product is derived from corn that may be genetically modified. PCR analysis of the sorbitol used in this product indicates that it does not contain genetically modified DNA/RNA.

Prop 65

To the best or our knowledge this product contain no substances listed on California Prop 65.

Shipping Status

Non-regulated

Storage Conditions

StarSoft EQC should be stored in closed, factory-sealed containers at temperatures between 10°C (50°F) and 49°C (120°F). Product stored for a prolonged period of time should be kept under a nitrogen atmosphere. Product should be used within three years of date of manufacture. Please refer to the Material Safety Data Sheet (MSDS) for this product for instructions on safe and proper handling and disposal.

Water Dispersibility Test Procedure

  1. Heat test softener to 40°C
  2. Heat DI water to 25°C
  3. Start agitation
  4. Add test softener
  5. Continue mixing holding temperature at 25°C for 10, 20, 30, and 60 minutes
  6. Filter solution through 200 mesh filter
  7. Check whether lumps appear
  8. If you see lumps on the sieve, the water dispersibility is no good

Water Dispersibility at 25°C

StarSoft EQC

10 min

Palm Fatty Acid Quat in IPA

10 min

20 min

30 min

60 min